All-metal seats „Palati“ with wire-mesh sitting surface

The wire-mesh seating area of these seats offer great sitting comfort despite their ascetic looks. Because of its make the wire-mesh construction of the seating area has many positives depending on its variable areas of use. Outside, for example where the seat is exposed to direct sunlight a wire-mesh seating area will not heat up because of the limited surface area, making it the better option compared to a seat with a smooth aluminium seating area.

We additionally recommend a lighter colour for the seat should it be installed in direct sunlight.

Further construction features of the all-metal seats “Palati” can be found in the overview.


If there are any questions about options or if you worry about the availability of options for you, please don’t hesitate to contact us. Any phone calls or emails asking for more details are absolutely non-binding and we are always looking forward to advise you.

 

Specifications and dimension sheets for download

 

All-metal seats „Palati“ with wire-mesh sitting surface

  • Fold down seat with wire-mesh sitting surface; wall-mounted

    model: 007-76
    Fold down seat with wire-mesh sitting surface; wall-mounted

    Seat made from all-metal. This unit is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2.

    The seating area is brought back into the resting position by means of springs.

     to the details page

  • Fold down seat with wire-mesh sitting surface; mounted to tubes

    model: 007-72
    Fold down seat with wire-mesh sitting surface; mounted to tubes

    Seat made from all-metal. This unit is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2.

    This seat is preferably mounted on a horizontal rectangular or square tube with a breadth of 50 mm (1.96 inches), either on your own construction or on our support frame. Complete unit with support frame for floor- or wall installation can be found under “sitting benches”.

     to the details page

  • Fold down seat with wire-mesh sitting surface and back rest; wall-mounted

    model: 124-10
    Fold down seat with wire-mesh sitting surface and back rest; wall-mounted

    Seat and back rest made from all-metal. This unit is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2.

    The seating area is brought back into the resting position by means of springs.

     to the details page

  • XXL fold down seat with wire-mesh sitting surface; wall-mounted

    model: 124-13
    XXL fold down seat with wire-mesh sitting surface; wall-mounted

    The seating area of this model is 70 mm (2.8 inches) broader and 46 mm (1.8 inches) longer (measured from the wall) than in model 007-76 and can support a weight of up to 250 kg (550 lbs), given that your wall is able to support the necessary forces.

    Seat and back rest made from all-metal. This unit is well suited for the usage in outdoor areas. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2.

    The seating area is brought back into the resting position by means of springs.

     to the details page

BLECH & TECH GmbH
Niederwaldstraße 4
79336 Herbolzheim, Germany

+49 (0) 76 43 / 33 38 95 - 0
+49 (0)76 43 / 33 38 95 - 11
nfblch-tchd



©2024 BLECH & TECH GmbH