Benches „Palati“ with smooth aluminium sitting surface

Seating- and back rest areas are made entirely from ergonomically formed, smooth aluminium pates. These variations of the all-metal seats add a bit of colour depending on Your choice. The folded seating areas are also suited as advertisement spaces.

The sitting rows and benches are available as fold down seats or as rigid seats, with optional back rest as well as optional arm rests. As applications we offer side tables instead of arm rests or fitting frames with alternative measurements for the height of the seats or the spaces between individual seats as well as alternative means of installation (for example to be set on concrete).

If there are any questions about options or if you worry about the availability of options for you, please don’t hesitate to contact us. Any phone calls or emails asking for more details are absolutely non-binding and we are always looking forward to advise you.

Specifications and dimension sheets for download

Fold down sitting benches „Palati“, with smooth aluminium sitting surface, floor mounted

Single fold down sitting bench with smooth aluminium sitting surface
model: 131-06

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area is brought back into the resting position by means of springs.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Single fold down sitting bench with smooth aluminium sitting surface and back rest
model: 131-05

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area is brought back into the resting position by means of springs.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome fold down sitting bench with smooth aluminium sitting surface
model: 132-06

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 132-05

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome fold down sitting bench with smooth aluminium sitting surface
model: 133-06

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 133-05

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome fold down sitting bench with smooth aluminium sitting surface
model: 134-06

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 134-05

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page

Fold down sitting benches „Palati“, with smooth aluminium sitting surface, wall mounted

You can find single wall mounted fold down sitting benches with or without back rest here:
Products - Fold down seats - All metal seats - With smooth sitting surface

Twosome fold down sitting bench with smooth aluminium sitting surface
model: 152-06

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page
Twosome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 152-05

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page
Threesome fold down sitting bench with smooth aluminium sitting surface
model: 153-06

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page
Threesome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 153-05

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page
Foursome fold down sitting bench with smooth aluminium sitting surface
model: 154-06

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page
Foursome fold down sitting bench with smooth aluminium sitting surface and back rest
model: 154-05

This bench is made entirely from metal. It is well suited for the usage in outdoor areas but one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas are brought back into the resting position by means of springs.
to the details page

Rigid sitting benches „Palati“, with smooth aluminium sitting surface, floor mounted

Single rigid sitting bench with smooth aluminium sitting surface
model: 131-16

This bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Single rigid sitting bench with smooth aluminium sitting surface and back rest
model: 131-15

This bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Single rigid sitting bench with smooth aluminium sitting surface and arm rests
model: 131-26

This bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Single rigid sitting bench with smooth aluminium sitting surface, back rest and arm rests
model: 131-25

This bench, fitted with a seating area that isn’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating area can heat up or cool down considerably depending on the influence of the weather. In some cases the wire-mesh seating area can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating area measures a height of 450 mm (17.7 inches). In case you would prefer another height for this seat or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome rigid sitting bench with smooth aluminium sitting surface
model: 132-16

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome rigid sitting bench with smooth aluminium sitting surface and back rest
model: 132-15

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome rigid sitting bench with smooth aluminium sitting surface and arm rests
model: 132-26

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Twosome rigid sitting bench with smooth aluminium sitting surface, back rest and arm rests
model: 132-25

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome rigid sitting bench with smooth aluminium sitting surface
model: 133-16

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome rigid sitting bench with smooth aluminium sitting surface and back rest
model: 133-15

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome rigid sitting bench with smooth aluminium sitting surface and arm rests
model: 133-26

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Threesome rigid sitting bench with smooth aluminium sitting surface, back rest and arm rests
model: 133-25

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome rigid sitting bench with smooth aluminium sitting surface
model: 134-16

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome rigid sitting bench with smooth aluminium sitting surface and back rest
model: 134-15

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome rigid sitting bench with smooth aluminium sitting surface and arm rests
model: 134-26

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page
Foursome rigid sitting bench with smooth aluminium sitting surface, back rest and arm rests
model: 134-25

This bench, fitted with seating areas that aren’t fashioned to fold down, is made entirely from metal and is well suited for the usage in outdoor areas. But one must take into account that the seating areas can heat up or cool down considerably depending on the influence of the weather. In some cases wire-mesh seating areas can be the better choice because of the reduced surface. All parts are non-flammable: The components fit the requirements of DIN4102-A1 and the colour-coating fits the requirements of DIN 4102-A2. All steel parts are coated with an electrochemical cathodic dip-paint coat (KTL) and are afterwards powder-coated to make them impervious to corrosion. Additionally, all screws are also made from stainless steel.
The arm rests additionally create a pleasant distance to the person in the next seat.
The seating areas measure a height of 450 mm (17.7 inches). In case you would prefer another height for these seats or another kind of grounding (setting on concrete for example) is necessary, please don’t hesitate to contact us.
to the details page

expand all close all

BLECH & TECH GmbH
Niederwaldstraße 4
79336 Herbolzheim, Germany

+49 (0) 76 43 / 33 38 95 - 0
+49 (0)76 43 / 33 38 95 - 11
nfblch-tchd